Greasewood 8" Lace-Up Composite Toe Waterproof Work Boot
$199.95
Color:
Dark Brown (Brown)
Width:
Size:
The 8” Greasewood Waterproof Lace-Up Composite Toe work boot from the TLX Western Work collection is a gritty, hardworking boot designed for safety and comfort.
Made with waterproof cowhide leather with a composite safety toe, it’s equipped with comfort inside and the protection you need for the job site on the outside no matter where you work. It also features our TLX removable orthotic with Dri-Lex® cover insole.
- Material: Water Buffalo
- Toe Shape: Square
- Heel: Walking/Block
- Outsole: Rubber
- Height: 8"
Composite Toe - Our composite safety toe provides security and comfort against impact, compression and electrical hazard at a fraction of the weight.
Waterproof - We use only the best construction and components to create waterproof boots that keep your feet dry no matter the conditions.
Dri-Lex® - Dri-Lex® is an abrasion resistant fabric that moves moisture away from the foot. This fabric works in tandem with a layer of spacer mesh which allows air to circulate and dry the foot by moving moisture to the outer layer.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.
Cowhide on a Western Boot - Non-waterproof
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply a leather conditioning cream to all exterior leather areas on the boot.
Work boots – Waterproof
- If the boot has laces, remove the laces.
- Rinse or hose down only the exterior of the boots to remove debris.
- Use a soft scrub brush dipped in mildly soapy water to softly scrub off remaining debris & dirt.
- Rinse the exterior of the boots with warm water and let thoroughly dry for up to 24 hours.
- Liberally apply leather conditioning cream to all exterior leather areas on the boot.
Suede
- Let the debris dry on the boots.
- Carefully use a semi-stiff brush to knock off debris from the boot.
- Dust off the remaining debris.
- Use a warm washcloth to dab off and clean the boot.
Exotics
- Ostrich Leather - Use a soft, damp washcloth to softly wipe down exotic leather. Then lightly apply a thin layer of exotic leather conditioner after cleaning. Ostrich leather can be extremely sensitive to oils – make sure you apply conditioner to a small area first prior to applying to the entire boots.
- Reptile Leather - Use a soft brush to gently wipe down the exotic leather. Once clean, liberally apply an exotic leather cream.
- Fish Leather - gently brush the surface of your boot removing dirt and debris. Then lightly apply an exotic leather conditioner to your boot.
- Shark Leather - one of the most durable leathers available on a boot, you will first want to spot clean this shark leather with a damp cloth. For stains, use a cleaner specifically designed for exotic leathers or a mild soap mixture to carefully remove the imperfection. Once cleaned, liberally apply an exotic conditioner.
- Stingray Leather - to clean, use a soft, barely dampened cloth to gently wipe off the stingray leather. Then delicately apply a premium exotic leather conditioner after thoroughly cleaned.
- Elephant Leather - use a soft brush or towel to remove dust, dirt and debris.
Then lightly apply a leather conditioner exclusive made for exotic leathers.
It is important to remember your cowboy boots should be cleaned and conditioned on a regular basis, especially if you wear them often.
Visit our Boot Care page for more in-depth advice and instructions.